Saturday, June 21, 2008

Was Inventor of 'Water Fueled Car," Stanley Meyer Murdered?



Stanley Meyer, Water-Fuel Cell Inventor & Promoter, Dies Suddenly

By Dr. Gene Mallove
1998

     Stanley A. Meyer, the controversial Ohio inventor who had claimed his technology could produce a hydrogen-oxygen mixture with a minimal energy input (compared with conventional electrolysis) died on March 21, 1998. He did not have a world-wide following, like he should have, few people have heard of him.

There were also those of adherents and people who had invested in his activities --- Water Fuel Cell (Grove City, OH). He was famous for his claimed "water fueled car" which was exhibited symbolically in the BBC/CBC 1994 documentary on cold fusion, "Too Close to the Sun". We were initially curious about Meyer's work, the late Christopher Tinsley of the UK, and the late Admiral of the British Navy, Sir Anthony Griffin, but who became frustrated by being unable --- or, more to the point, not allowed --- to confirm (or reject) Meyer's claims.

It makes no sense that after discovering the technological process that he had. Why there is no way that a reasonable, straightforward marketing strategy would have failed to make his technology quickly spread worldwide. He could have become very influential and very rich.

There remains a very strong suspicion that he had no such process, from his enemies, (Oil Corp. Cartels) even though he conducted a demonstration (before this writer and another engineer at the Meyer lab in 1993) of the production of copious hydrogen/oxygen gas from what visually seemed like a small input power. But Meyer was exceedingly paranoid and he flatly refused reasonable requests by us and others to test the performance --- the input/out power ratio, even with the proviso that we did not have to "look into his black box" of electronics feeding his rather simply constructed stainless steel electrode, alternating current and voltage cell. The last such refusal --- this one in public and recorded on video tape --- was at the ANE meeting in Denver CO in 1997. Then Meyer loudly and falsely protested that he would "lose his patent rights" if he were to release anything but complete, integrated systems --- such as a water-fueled vehicle.

In 1996, Meyer lost a long-lasting Ohio civil court battle accusing him of "egregious fraud" against a former associate. Meyer's said, he ascribed this and other alleged assaults on him to various conspiracies against water as a fuel. He was offered huge sums of money (a billion dollars) to "suppress this technology", but that he had refused those sums. One had the impression that he really believed that there were conspiracies against him. These conspiracies exist today. That is a tragedy, a very compounded tragedy if he had actually come up with something novel and useful that he was hiding.

This is a very complex human and scientific story that we shall want to cover in greater detail in a future issue of infinite energy. There are other processes and inventions that suggest that splitting water molecules with much greater efficiency than with conventional electrolysis is possible. Certainly there are other novelties within water --- "cold fusion" to be sure --- that really do produce prodigious quantities of energy, in the mode Meyer claimed. For now, here are some of the facts surrounding Meyer's death:

He was apparently eating dinner at a Grove City OH restaurant, when it is reported that he jumped up from the table, yelled that he'd been poisoned", and rushed out into the parking lot, where he collapsed and died. It has been reported by Meyer's associates that Meyer had just secured funding for a $50 million research center near Grove City, but there is no way to confirm or reject this at the moment.

1 comment :

  1. Gamma ray emissions is significant

    On February 29, 2008, New Energy Congress member, Robert Indech, PhD PE wrote:

    Dear Sterling:

    Viewing the video, the author needs to be congratulated for putting his ideas into practice. His technique is to discharge a high voltage (tunable) high frequency Tesla coil into a water bath, which may have some components of heavy water. In the video and comments he mentions putting 6000 watts into the water. Further, he notes that the Tesla coil itself gives off Gamma bursts, so that those measured could not be ascribed directly to the fusion process.

    I did see no mention of measurement of high energy neutrons (admittedly which is a very difficult thing to measure). The requirement of 750 KV is mentioned often. Is that the potential needed for acceleration of the hydrogen to produce fusion?

    The system could certainly be downsized to experiment with. What frequency is being used to resonate in the water? There are other, more stable power systems rather than Tesla coils, which produce a very clean high voltage, high frequency waveform, but with very little amperage. More significantly, such sources would not have Gamma ray emission, so that any detected rays would necessarily come from the fusion process itself.



    Suggestions for Mechanism Improvement

    On March 25, 2008, New Energy Congress member, Robert Indech, PhD PE wrote:

    Dear Sterling:

    In the Azar Fusion model, a Tesla coil discharging between two electrodes in water creates a plasma state following dissociation of the water to hydrogen and oxygen. The intense electric field causes an acceleration of the hydrogen ions toward the negative electrode, at a velocity that may reach relativistic speeds. As any accelerating charged body also emits a magnetic field, so too does the moving proton. The field so generated is akin to that of the magnetic field around a current carrying wire: the magnetic vector is strictly angular, whose magnitude decreases as the inverse square of the distance between the test point and the moving proton. If there is another moving proton nearby with the same vector direction as the first moving proton, then this magnetic field will give rise to a force on the second proton that is directed radially inward to the first proton. A bunching up of the parallel protons, or "squeeze" will occur. These equations and effects are fully described in the inventors "scientific" disclosure.

    The inventor makes the leap that the subsequent radial velocity caused by this magnetic bunching effect is sufficient to overcome the natural Coulombic repulsion between these two protons, so much so that fusion will occur. For proton fusion, a velocity equivalent to 200-300 million degrees Kelvin is necessary IN THE RADIAL DIRECTION BETWEEN THE FUSION PROTONS. For deuterium fusion, only 20-30 million degrees Kelvin equivalent velocity. The Telsa coil pulse provides a longitudenal acceleration of the protons; it is the magnetic pinch effect that provides the radial acceleration. Thus, simply increasing the intensity of the Tesla coil may achieve a change in longitudenal velocity from .95 to .98 of the speed of light, but the corresponding radial net velocity would not be anywhere near that amount.

    It is possible, however, for fusion to occur in isolated regions of the wave pathway between the two electrodes, as an accelerated proton in split water may impact a water molecule just before it has been split; in this case the enormous velocity imparted to the proton may be sufficient to overcome the Coulombic barrier. However, this is not a magnetic pinch effect, but it may give rise to some low level evidence of fusion occurring. In this case, one should do an energy balance to see if the net process is economically profitable (i.e. muon based fusion is possible, but not profitable).

    The major problem with the Farnsworth Fusor is instability. The Fusor, when operated at fusion levels, with give rise to jets of ions which escape the spherical confining field. Thus, the Fusor fusion is possible, but not profitable. Perhaps this inventor can combine the two technologies, and utilize the magnetic pinch effect to bring stability to the fusion process, thus making the device possible and profitable. That is, utilize a deuterium water source, use a tunable Tesla coil to energize two electrodes, both electrodes set at the output potential of the coil, and surround the electrodes with a grounded open type electrical wire sphere. The AC oscillation induced by the Telsa coil may be sufficient to create stability so that ion jets do not form. Just a suggestion.
    Promising Concept

    On March 25, 2008, Daniel Bowers wrote:

    Sterling,

    I will admit that the calculations behind the physics are over my head but I understand magnetic fields, fields of energy, and how it is necessary to smash particles together to capture nuclear energy.

    A plasmoid is a stabilized ball of plasma which is contained within its own magnetic field. Chukanov discovered this and along with his work in cold fusion has grasped the concept.

    The Bussard Polywell device with concentric magnetic fields is a way to manipulate the flow of the plasma to get the necessary reaction. It was adapted from the Farnsworth–Hirsch Fusor.

    After much experience reviewing plasma systems and every type of fusion reactor known to the wiki world and after reviewing the noble fuse technology I have come to a conclusion.

    The concepts behind the Azar Fusion device are sound. Sandia National Labs achieved temperatures in excess of 2 billion degrees kelvin which is hot enough to achieve aneutronic fusion of Boron 11. For Mr. Azar to achieve the temperatures and the necessary velocity in order for fusion to occure with hydrogen or deuterium is very much conceivable. 100 to 300 million degrees kelvin in this device seems possible.

    Last month you asked me to review a magnetohydrodynamic ocean generator which used the water as the containment field for a solid state magnet generator. Mr. Azar has applied the same principle to his technology utilizing the water to contain the magnetic field. Within this magnetic field electricity is passing at a high speed and the ionized particles get caught in the plasma pinch.

    The concept for using a toroid to give increased efficiency is one that is applied in most fusion reactors to date.

    The potential for scaleability, the simplicity and reproducability of the Noble Fusion technology gives this system merit when it comes to the development of viable free energy devices.

    There are novel concepts with water based fusion reactors when it comes to containment and replenishing fuel. I believe that there is the potential for atmospheric pressure devices and much development that may stem from this technology. My first suggestion would be to employ the concept of the Farnsworth Hirsch Fusor in a heavy water based reaction vessel.

    If the technology can be validated it will open the doors to the development of optimized devices. I have many recommendations for alternate configurations in mind but I wil save those for another day.

    ReplyDelete

Dear Contributor,

Your comments are greatly appreciated, and coveted; however, blatant mis-use of this site's bandwidth will not be tolerated (e.g., SPAM etc).

Additionally, healthy debate is invited; however, ad hominem and or vitriolic attacks will not be published, nor will "anonymous" criticisms. Please keep your arguments "to the issues" and present them with civility and proper decorum. -FW

LIVE SIGHTING REPORTS BY MUFON

Mutual UFO Network Logo